In order to stay on top of the game we as professionals must change.
There has been a lot of trepidation about the new board rules that are impending.
I am going to tell you right now that I disagree with some of them and some of the changes being suggested are good.
I have said this many times before. Small companies record more doc's and file more maps than anyone.
This is a major problem, in that I personally see very little participation from the small guys. (I could be wrong).
I will tell you now that if I had time I would be right there in peoples faces bitching about a few things and trying to make things it right for all. Unfortunately time is one thing I am very short on.
This is something I feel very bad about. While I know very few of you, I think that I would like to make things better, even if I dislike you, you still deserve good things because we share the survey profession.
While my hands are tied on time and I am sure that other small companies are in the same boat I would like to hear some suggestions from small guys.
Yes we do need to progress our standards as time moves forward.
Bottom line boys and girls, the change is here. Just roll it with and bone up on the wording in your contracts to cover your ass. And just follow the rules.
In time we will all adapt to whatever rules are passed. It's kind of like getting a new software or taking on a new car payment. You just kind of grow into it.
Peace out surveyors, it's gonna be a crazy week. Have fun and be safe!!
Sunday, March 25, 2012
Sunday, March 18, 2012
Pain
There other night I had to stand in a public forum and explain why I am professionally qualified to sit on a board.
I wrote up my pitch and thought about it and went over it for a few days.
I got there, had it all memorized right down to my delivery. I had it stuck in my head that they were going to love me and I was going to waltz right on to that board.
When I arrived there were some people in front of me and they seemed rather calm and did a great job although they were very dull.
It was my turn and when I got up there and looked at that panel and it all went away, I forgot everything that I was going to say. I was a deer in the head lights so I did what I thought was best, took a step back and punted.
I babbled for about a minute and a half and then froze. Every thought I once had again left my brain. I looked at the panel and said "that's it" and threw my hands up palms facing them and said "frozen", I smiled and said thank you.
Then came the part that I got pissed off about. The person that nominated asked me if I realized that a certain qualification was required to sit on this particular board. I was a little dismayed and wanted to remind the person that they gave me the nomination, but instead I respectfully stumbled through an answer.
If you ever want to have a humbling experience try this. You will get an adrenaline rush that is out of this world that will last you for days. I still get butterflies in my gut when I think about this.
Oh, no I did not get appointed.
A little humility goes a long way, especially when you tube it in public.
Ha!!
I wrote up my pitch and thought about it and went over it for a few days.
I got there, had it all memorized right down to my delivery. I had it stuck in my head that they were going to love me and I was going to waltz right on to that board.
When I arrived there were some people in front of me and they seemed rather calm and did a great job although they were very dull.
It was my turn and when I got up there and looked at that panel and it all went away, I forgot everything that I was going to say. I was a deer in the head lights so I did what I thought was best, took a step back and punted.
I babbled for about a minute and a half and then froze. Every thought I once had again left my brain. I looked at the panel and said "that's it" and threw my hands up palms facing them and said "frozen", I smiled and said thank you.
Then came the part that I got pissed off about. The person that nominated asked me if I realized that a certain qualification was required to sit on this particular board. I was a little dismayed and wanted to remind the person that they gave me the nomination, but instead I respectfully stumbled through an answer.
If you ever want to have a humbling experience try this. You will get an adrenaline rush that is out of this world that will last you for days. I still get butterflies in my gut when I think about this.
Oh, no I did not get appointed.
A little humility goes a long way, especially when you tube it in public.
Ha!!
Sunday, March 11, 2012
Auto Topo
The other day I was out in the Rio Verde area doing a Boundary-Topo job.
I have done work in that section before and once again thanks to GDAC and it's interactive map with points and some solid surveys I was calc'd and ready to go when I got there.
Since I am a diligent monkey I went around the 1/4 section and established my measured data. The center of section was there and checked as shown on some other surveys, so I accepted it.
I proceeded to search for the lot monuments and found them all and they checked well, so now they all have nice new LS caps on them in the color of blue which is what I have always used. However when they are gone I am going to go 100% with brass and aluminum tags.
I then started the topo. I walked the lot and located all of the vegetation and dirt roads. There were no definitive washes so no need for cross sections.
After I was finished with all of that I went back to the truck and pulled the gps off of the rod and put it on a back pack that I rigged with a pvc cage to hold a small rod in place. I got everything hooked up, changed my HR and went into auto topo mode. I proceeded to walk the lot and take about 1700 shots on top of the already collected info.
This took about an hour. 1700 seems like a lot of shots but this was a 3 acre parcel and I had the DC set at 3 second intervals.
I am a huge believer that it is easier to take points out of a drawing than have to go back and get more.
Now hear is the best part about this job. Field time with travel 5.5 hours. I accomplished this because of my pre-job research and calc's and because of technology.
The office time took quite a while because I had re-calc the boundary to my measured section which actually brought the lot monuments in better and had to prepare 2 drawings, a topo and and ROS which I will file in the next month or so when I get a few stacked up. I always wait to get a few to save on the fuel cost and trip time.
I have spoken many times about how technology has enhanced out lives and made it easier to turn a profit on a job. I has also allowed me to increase my level of customer service, get things done quicker with more data and turn out a very professional looking product that I can be proud of.
Go technology!
I have done work in that section before and once again thanks to GDAC and it's interactive map with points and some solid surveys I was calc'd and ready to go when I got there.
Since I am a diligent monkey I went around the 1/4 section and established my measured data. The center of section was there and checked as shown on some other surveys, so I accepted it.
I proceeded to search for the lot monuments and found them all and they checked well, so now they all have nice new LS caps on them in the color of blue which is what I have always used. However when they are gone I am going to go 100% with brass and aluminum tags.
I then started the topo. I walked the lot and located all of the vegetation and dirt roads. There were no definitive washes so no need for cross sections.
After I was finished with all of that I went back to the truck and pulled the gps off of the rod and put it on a back pack that I rigged with a pvc cage to hold a small rod in place. I got everything hooked up, changed my HR and went into auto topo mode. I proceeded to walk the lot and take about 1700 shots on top of the already collected info.
This took about an hour. 1700 seems like a lot of shots but this was a 3 acre parcel and I had the DC set at 3 second intervals.
I am a huge believer that it is easier to take points out of a drawing than have to go back and get more.
Now hear is the best part about this job. Field time with travel 5.5 hours. I accomplished this because of my pre-job research and calc's and because of technology.
The office time took quite a while because I had re-calc the boundary to my measured section which actually brought the lot monuments in better and had to prepare 2 drawings, a topo and and ROS which I will file in the next month or so when I get a few stacked up. I always wait to get a few to save on the fuel cost and trip time.
I have spoken many times about how technology has enhanced out lives and made it easier to turn a profit on a job. I has also allowed me to increase my level of customer service, get things done quicker with more data and turn out a very professional looking product that I can be proud of.
Go technology!
Sunday, March 4, 2012
Roof Top
One of the things that I genuinely love about surveying is the stuff we get to see and do.
Unless you are a construction monkey every job is different.
I personally take something new away from every job.
So there I am last week in Tucson at U of A breaking down a block that the Marriott sits on.
First I have to tell you that the ground view at that college is fantastic. It took me back to a much simpler and more intoxicated time in my life where the only things that were important was beer and girls. Oh yeah!!!
Flashing to present day I was surveying the block and getting ready to go on the Marriott's roof.
All was going well thanks to AZ Cors and the Pima County GIS site. I had my control and was ready.
I got up on the roof just in time for AZ Cors to take a dump due to Leica maintenance so I had to go to plan B which was go back down and set up the base.
Upon doing so I proceeded to have the crappiest GPS day I have had in years. I got tied into the ground control, went back up on that roof and what should have taken 20 minutes took 2 hours.
I was in hell. There I am above everything with a wide open sky with the wackiest constellation I have ever seen. Ugh!!
Every shot seemed to take forever so I went to plan C. I made a detailed sketch, measured everything up and shot the bare minimum.
When I got off that roof and walked outside the first thing I saw was a beautiful girl and all that BS frustration instantly left. I even got a smile out of her :)
Life can be good in the field even when the technology hands you a pile of shit. It's remarkable what a pretty face will do to my mind.
Unless you are a construction monkey every job is different.
I personally take something new away from every job.
So there I am last week in Tucson at U of A breaking down a block that the Marriott sits on.
First I have to tell you that the ground view at that college is fantastic. It took me back to a much simpler and more intoxicated time in my life where the only things that were important was beer and girls. Oh yeah!!!
Flashing to present day I was surveying the block and getting ready to go on the Marriott's roof.
All was going well thanks to AZ Cors and the Pima County GIS site. I had my control and was ready.
I got up on the roof just in time for AZ Cors to take a dump due to Leica maintenance so I had to go to plan B which was go back down and set up the base.
Upon doing so I proceeded to have the crappiest GPS day I have had in years. I got tied into the ground control, went back up on that roof and what should have taken 20 minutes took 2 hours.
I was in hell. There I am above everything with a wide open sky with the wackiest constellation I have ever seen. Ugh!!
Every shot seemed to take forever so I went to plan C. I made a detailed sketch, measured everything up and shot the bare minimum.
When I got off that roof and walked outside the first thing I saw was a beautiful girl and all that BS frustration instantly left. I even got a smile out of her :)
Life can be good in the field even when the technology hands you a pile of shit. It's remarkable what a pretty face will do to my mind.
Subscribe to:
Posts (Atom)